Dell PowerEdge C8000 - Manual (Page 275)

Updating Firmware Images and Monitoring the PDU Power Status 275
6
Updating Firmware Images and
Monitoring the PDU Power Status
Verifying and Updating the Fan Controller Board
Firmware Via the Compute Sled
Viewing the Fan Controller Board Firmware Version Information
1 Run the command line interface.
2 Enter the following command line:
cmd > fcbutil /i
Updating the Fan Controller Board Firmware
NOTE: Removing the FCB during a FCB firmware update will break the firmware
update process and could damage or corrupt the image on the FCB. Please contact
Dell for more help if this occurred.
NOTE: When updating FCB components, such as the CPLD and fan table, the
update sequence is as follows: CPLD > fan table > FCB firmware.
1 Download the latest fan controller board firmware from dell.com/support.
Browse to the location where you downloaded the firmware package and
extract the package.
2 Run the fan controller (FC) update utility.
– MS-DOS — FCBUTIL.EXE
– Windows — fcbutil_x64.exe
– Linux — fcbutil_linux or fcbutil_linux64