Dell PowerEdge C8000 - Manual (Page 170)

170 Using the System Setup Program
PMC Firmware Behavior
The following table lists the PMC firmware behavior.
Table 2-23. PMC Firmware Behavior
Safe Boot Code Firmware Behavior Operational Code Firmware Behavior
• PMC firmware enables network/SNMP
service
• PMC firmware update is done by TFTP
via SNMP set object property
• The reset to default button works
• PMC firmware enables network/SNMP
service
• PMC firmware update is done by TFTP
via SNMP set object property
• Use the SNMP SET/GET commands to
request for a specific variable
• PMC firmware send traps to remote
client when critical errors occur.
• You can download or upload the PMC
configuration information by TFTP via
SNMP set object property
• The reset to default button works