Dell PowerEdge C8000 - Manual (Page 124)

124 Using the System Setup Program
013F Memory
Remapping
(3GB~4GB)
When enabled, memory remapping relocates memory
space (3GB - 4 GB) to the space above 4 GB.
0140 Execute-Disable
(XD) Bit
Capability
When disabled, the Intel processors supporting the
XD feature reports the support to the operating
system.
0141 Execute-Disable
(XD) Bit
Capability
When enabled, the Intel processors supporting the
XD feature reports the support to the operating
system. If the operating system supports this extended
paging mechanism, it will provide some protection
against software viruses that exploit buffer overflows.
014A Virtualization
Technology
Allows you to disable the VT technology in applicable
processors. If disabled, the VT feature is unusable in
any OS.
014B Virtualization
Technology
Allows you to enable the VT technology in applicable
processors.
014E External USB
PORT1
Allows you to electrically disable the external USB
connector 1.
014F External USB
PORT1
Allow you to electrically enable the external USB
connector 1.
0168 Max CPUID
Value Limit
Some OS, which is (NT4), fails if the value returned
in EAX is >3 when CPUID instruction is executed
with EAX=0. This setting disables the 3 or less.
0169 Max CPUID
Value Limit
Some OS, which is (NT4), fails if the value returned
in EAX is >3 when CPUID instruction is executed
with EAX=0. This setting limits CPUID function
to 3.
016F Embedded SAS
Controller
Disables the SAS controller. This token applies to the
onboard SAS controller.
0170 Embedded SAS
Controller
Enables the SAS controller. Sets the device class code
as AHCI/RAID and executes the RAID Option ROM.
This token applies to the onboard SAS controller.
Table 2-1. D4 Token Table (continued)
Token Setup Option Description