Drucker Diagnostics Paralens Advance - Manual (Page 63)

Appendix B
Service, Maintenance and Specifications
B-1 INTRODUCTION
Service and maintenance procedures for the QBC
Autoread Plus System approved for use by the
customer are limited to the items described in
this Appendix. DO NOT ATTEMPT ANY OTHER
SERVICE OR REPAIRS. Appendix C contains a
list of replacement parts and accessories available
through your QBC distributor.
B-2 SERVICE AND MAINTENANCE
B.2.1 Autoread Plus Analyzer
There are no customer-serviceable parts on the
Autoread Plus analyzer. Calibration adjustments,
failure of internal lamps, or mechanical-electrical
problems must be referred to a qualified QBC
Diagnostics Inc. service technician.
B.2.2 Power Pack
There are no customer-serviceable parts on the
power pack. The unit, however, is protected
by internal overload and thermal fuses. If the
power pack fails to supply d.c. outputs to the
analyzer, check the electrical line to the receptacle
that supplies current to the power pack before
requesting service.
B.2.3 QBC Capillary Centrifuge
The operator’s manual supplied with the QBC
Capillary Centrifuge contains detailed instructions
and procedures for performing operator-authorized
service and repairs.
B.2.4 QBC Pipetter
Blood leakage or failure of the QBC pipetter to
aspirate blood to the correct level may indicate that
the pipetter barrel mechanism is worn and should
be replaced. Replacement barrels (Part No. 421705)
can be ordered through your distributor.
For technical assistance in the United States, call:
QBC Diagnostics Inc. Technical Service
1-866-265-1486 (toll free)
Outside the United States, call: +1-814-692-7661
or contact your distributor or nearest QBC
Diagnostics Inc. office.
B-1