Drucker Diagnostics Paralens Advance - Manual (Page 23)

3.4 PRINTER
For U.S. customers, a printer is supplied with the
Autoread Plus System. For international customers,
a printer with the correct voltage rating must be
procured locally. (Note: For additional information
on working with USB printers, consult the included
insert labeled “IMPORTANT INFORMATION”.)
Detailed directions on unpacking, set up, and
operation of the printer are provided in the
manufacturer’s manual supplied with the unit.
3.5 WORKSTATION ACCESSORY
The QBC workstation (Figure 3-16), p/n 424226, is
a convenient accessory to facilitate the preparation
and storage of blood collection and centrifuged QBC
tubes. The workstation incorporates a receptacle
for the QBC venous blood pipetter, differently sized
tube wells, and a notched and numbered front rack
for centrifuged QBC tubes.
3.6 VENOUS BLOOD PIPETTER
The semi-automatic QBC pipetter shown in
Figure 3-16 is a dedicated device for filling QBC
tubes from a Vacutainer™ brand or similar blood
collection tube. Fill volume is fixed at 111.1 µL
for filling standard or venous blood tubes with
specimen. An AccuTube spacer must be added to
the pipetter to adjust the fill volume to 70 µL when
filling QBC AccuTubes. Instructions for use are
provided in Section 4.8.
3.7 SPECIFICATIONS
See Appendix B for specifications on the QBC
Autoread Plus System.
3-8
Figure 3-16.
QBC Workstation and Venous Blood Pipetter