Advanced operation, Automatic reports (if installed) – ADS Environmental Services Spider QR 775010 A0 User Manual
Page 74

ADS Environmental Services ADS Spider User Manual
Page 72
Advanced Operation
Automatic Reports (if installed)
The Spider can be set up to automatically send reports. A report can
be sent by e-mail and/or by File Transfer Protocol (FTP).
There are 3 types of automatic reports, all operating independently of
each other:
Daily reports
Periodic reports
Ad-hoc reports
Daily reports are sent once per day, at a user selectable start time.
They contain all the data collected in the previous 24-hour period. For
example, if the user sets the Daily report start time to 4:00, the report
will contain the data between 4:00 AM the previous day to 03:59 AM
on the current day.
Periodic reports can be sent every hour, every 3 hours, every 6
hours, or every 12 hours, as selected by the user. They are always
“
lined-up
”
with real time. Therefore, 6-hourly periodic reports will be
sent at 06:00, 12:00, 18:00, and midnight. Each report contains the
data collected in the previous reporting period.
Ad-hoc reports are initiated by a user text message command or by
an active alarm with the
“
send Report
”
setting set to
“
YES
”
. Ad-hoc
reports initiated by alarms contain data collected in the current day. A
user can request an ad-hoc report containing data for a single day up
to 7 days in the past.
For example, sending the command
“
GET REP
”
will request a report
with the current day
’
s data. A command
“
GET REP3
”
will request all
data collected in the single day, 3 days ago. (Notice that no space
exists before the digit
‘
3
’
.)