Install rear gussets, Install left rear gusset, Install right rear gusset – Great Plains 2007HD Update Installation User Manual
Page 26: Install left rear gusset install right rear gusset, Rl b f
22
NTA607HD or NTA2007HD
Great Plains Manufacturing, Inc.
166-370M
05/25/2011
Install Rear Gussets
Install Left Rear Gusset
Refer to Figure 34
106. Select one new:
266-307D REAR MAIN FRAME LAP GUSSET
107. Roughly position the gusset on the bottom left rear
corner of the cart mainframe. Mark the frame using
the right
and front edges
of the gusset.
Remove the paint from the frame in these areas,
and long the inside edge of the corner
.
108. Clamp the gusset on the frame.
Set the rear edge
to slightly overlap the rounded
corner of the frame tube.
Set the left edge
to provide a fillet space to the
existing outside gusset plate
.
Tack weld in place.
109. Finish weld with a 6 mm (
1
⁄
4
in) fillet.
Install Right Rear Gusset
Refer to Figure 35
110. Select one new:
266-307D REAR MAIN FRAME LAP GUSSET
111. Roughly position the gusset on the bottom left rear
corner of the cart mainframe. Mark the frame using
the right
and front edges
of the gusset.
Remove the paint from the frame in these areas,
and long the inside edge of the corner
.
112. Clamp the gusset on the frame.
Set the rear edge
to slightly overlap the rounded
corner of the frame tube.
Set the left edge
to provide a fillet space to the
existing outside gusset plate
.
Tack weld in place.
113. Finish weld with a 6 mm (
1
⁄
4
in) fillet.
114. Remove all slag and splatter. Clean and de-grease
all bare and discolored areas. Paint green.
Figure 34
Left Rear Gusset (from below)
32126
925
1
3
2
R
L
B
F
4
5
6
925
1
2
3
4
5
6
Figure 35
Right Rear Gusset (from below)
32126
925
1
3
2
R
L
B
F
4
5
6
925
1
2
3
4
5
6