LaMotte SMART3 Colorimeter - Manual (Page 154)

PROCEDURE
1. Press and hold until colorimeter turns on.
2. Press ENTER to select TESTING MENU.
3. Select ALL TESTS (or another sequence containing 028 Cu BCA Tablet) from
TESTING MENU.
4. Scroll to and select 028 Cu BCA Tablet from menu.
5. Rinse a clean tube (0290) with sample water. Fill to the 10 mL line with sample.
6. Insert tube into chamber, close lid and select SCAN BLANK.
7. Remove tube from colorimeter and add one *Copper Tablet (T-3808). Cap and
shake vigorously until tablet dissolves. Solution will turn purple if copper is
present. Wait 2 minutes.
8. At end of 2 minute waiting period, mix, insert tube into chamber, close lid and
select SCAN SAMPLE. Record result.
9. Press to turn colorimeter off or press
EXIT
to exit to a previous menu or
make another menu selection.
COPPER, BCA, Tablet SMART3 Test Procedures 11.10
Test P
rocedures