Exide Technologies Section 94.40 - Manual (Page 69)

APPENDIX B
65
FIELD INSTALLABLE ACCESSORIES AND OPTIONS
All AT30 options/accessories listed below are available in kits for field
installation, which contain all parts, mounting hardware and detailed installation
instructions. Kit part numbers may be dependant upon enclosure type (e.g.
Style-5018, Style-5030 & Style-163). To order accessories/options, please
provide the following information for each kit:
•
Model number and serial number of your battery charger
•
Factory part number and description, from the table below
•
Quantity required
Contact your sales representative to place an order for accessories/options.
Description Kit Part Number
standard DC Output Filtering (per NEMA PE5-1996) contact your sales rep.
Battery Eliminator Filtering (per NEMA PE5-1996) contact your sales rep.
Auxiliary Alarm Relay PC Board (A5) EI0213-02, -03, -04
Copper Ground Bus with one (1) box lug EI0195-02, - 03, -03
AC Input Lightning Arrestor (VR3) EJ1074-02
Wall-Mounting Kit for Style-5018 Enclosure EI5008-00
Relay Rack-Mtg. Kit for Style-5018 Enclosure (23-24in/584-610mm) EI0193-03
Cabinet Heater Strips for Style-5018 Enclosure EJ5042-00
Cabinet Heater Strips for Style-5030 Enclosure EJ5166-00
Cabinet Heater Strips for Style-163 Enclosure EJ5183-00
NEMA-2 Type Drip Shield for Style-5018, -5030, -163 Enclosure EI0191-02, - 03, -04
Padlock for Style-5018, -5030, -163 Enclosure Front Panel Door EI0215-01, - 01, -02
Remote Temperature Compensation Probe Assembly (A10) see table below
DNP3 Level 2 / Modbus Communications Module see Appendix E
Forced Load Sharing Accessory EJ5126-XX
Remote Temperature Compensation Probe
The temperature compensation assembly consists of two (2) components:
1. To order a replacement probe (or puck), request part number EJ5032-00. This
probe is good for all charger output voltages and all battery types.
2. The standard temperature compensation assembly is supplied with a 25ft / 7.6m
interconnection cable. If you need a longer cable, order it from the table below, which
also shows the ordering part number for a complete probe kit.
Temperature Compensation Probe Kits
Cable Length
(feet / m)
Kit Part Number
(includes probe)
Replacement Cable
Part Number
25 / 7.6 EJ5033-00 EJ5011-00
50 / 15.2 EJ5033-01 EJ5011-01
100 / 30.5 EJ5033-02 EJ5011-02
200 / 61.0 EJ5033-03 EJ5011-03
Use a single cable assembly. Do not try to splice cables together to increase the length.