Exide Technologies Section 94.30 - Manual (Page 75)

APPENDIX B
71
FIELD INSTALLABLE ACCESSORIES AND OPTIONS
All options and accessories listed below are available in kits for field
installation. Kits contain all parts and hardware with detailed installation
instructions. To order accessories/options, please provide the following
information for each kit:
•
Model number and serial number of your battery charger
•
Factory part number and description, from the table below
•
Quantity required
Contact your sales representative to place an order for accessories/options.
Description Kit Part Number
standard DC Output Filtering (per NEMA PE5-1996) see table 3-2
Battery Eliminator Filtering (per NEMA PE5-1996) see table 3-3
Auxiliary Alarm Relay PC Board (A5) EI0213-02
Ground Bus with one (1) box lug for #14-1/0 AWG EI0195-01
AC Input Lightning Arrestor (VR3) EJ1074-01
Floor-Mounting Kit for Style-5017 Enclosure EI0192-00
Relay Rack-Mounting Kit for Style-5017 Enclosure (19in/483mm) EI0193-01
Relay Rack-Mtg. Kit for Style-5017 Enclosure (23-24in/584-610mm) EI0193-02
Cabinet Heater Strips for Style-5017 Enclosure EJ5041-00
Wall-Mounting Kit for Style-5018 Enclosure EI5008-00
Relay Rack-Mtg. Kit for Style-5018 Enclosure (23-24in/584-610mm) EI0193-03
Cabinet Heater Strips for Style-5018 Enclosure EJ5042-00
NEMA-2 Type Drip Shield for Style-5017/5018 Enclosure EI0191-01/02
Padlock for Style-5017/5018 Enclosure Front Panel Door EI0215-01
Remote Temperature Compensation Probe Assembly (A10) see table below
DNP3 Level 2 / Modbus Communications Module see Appendix E
Forced Load Sharing Accessory EJ5126-XX
Remote Temperature Compensation Probe
The temperature compensation assembly consists of two (2) components:
1. To order a replacement probe (or puck), request part number EJ5032-00. This
probe is good for all charger output voltages and all battery types.
2. The standard temperature compensation assembly is supplied with a 25ft / 7.6m
interconnection cable. Do attempt to splice cables together to increase the
length. If a longer cable is needed, order it from the table below, which also
features ordering part numbers for a complete tempco probe kit.
Temperature Compensation Probe Kits
Cable Length
(feet / m)
Kit Part Number
(includes probe)
Replacement Cable
Part Number
25 / 7.6 EJ5033-00 EJ5011-00
50 / 15.2 EJ5033-01 EJ5011-01
100 / 30.5 EJ5033-02 EJ5011-02
200 / 61.0 EJ5033-03 EJ5011-03