Exide Technologies Section 94.30 - Manual (Page 7)

INSTALLING THE AT10.1
3
1.4. MOVING THE AT10.1
Once you have established that the AT10.1 is undamaged, identify the
enclosure style and weight of your unit. Refer to the table below.
AT10.1 Enclosure Type And Shipping Weight Table
Group II Cabinets (Style-5017 / Style-5018)
Ampere Rating Output
Voltage 30 Adc 40 Adc 50 Adc 75 Adc 100 Adc
12 Vdc
Style-5017
140 lbs
63 kg
Style-5017
155 lbs
70 kg
Style-5017
170 lbs
77 kg
Style-5018
220 lbs
100 kg
Style-5018
280 lbs
127 kg
24 Vdc
Style-5017
150 lbs
68 kg
Style-5017
180 lbs
82 kg
Style-5017
190 lbs
86 kg
Style-5018
250 lbs
113 kg
Style-5018
320 lbs
145 kg
48 Vdc
Style-5017
170 lbs
77 kg
Style-5017
220 lbs
100 kg
Style-5017
240 lbs
109 kg
Style-5018
340 lbs
154 kg
Style-5018
440 lbs
200 kg
130 Vdc
Style-5017
220 lbs
100 kg
Style-5018
300 lbs
136 kg
Style-5018
320 lbs
145 kg
Style-5018
440 lbs
200 kg
n/a
NOTE: Actual unit is approximately 20 lbs / 9kg below listed shipping weight in table.
The
Style-5017 & 5018 enclosures do not feature lifting eyes for
moving. Instead, whenever possible move the unit with a forklift truck
using the supplied shipping pallet. To hoist the unit into a wall-mount or
rack-mount location, use a heavy-duty sling applicable to the enclosure
size and unit weight. To relocate the
Style-5017 enclosure, use the
aforementioned sling on a hoist or forklift truck. To relocate the
Style-
5018 enclosure, use a forklift truck by lifting the unit through the 3in /
76mm gap located between the mounting legs.
1.5. MOUNTING THE AT10.1
Chose the mounting method for the unit enclosure from the table below.
ENCLOSURE MANUAL
SECTION
MOUNTING METHOD
Style-5017 Style-5018
1.5.1 Wall-Mounting
STANDARD OPTIONAL
1.5.2 Floor-Mounting OPTIONAL
STANDARD
19in / 483mm Rack-Mounting OPTIONAL N/A
1.5.3 23-24in / 584-610mm
Rack-Mounting
OPTIONAL OPTIONAL