Electrical installation (continued), Flash patterns – SoundOff Signal nFORCE® Interior Traffic Controller User Manual
Page 4
IMPORTANT INFORMATION:
Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these devices to ensure compliance.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/sales-support.
If you have questions regarding this product, contact
Technical Services, Monday - Friday, 8 a.m. to 5 p.m. at 1.800.338.7337 (press #4 to skip the automated message).
Questions or comments that do not require immediate attention may be emailed to
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
nFORCE® LED Traffic Controller - Interior Use Only
ENFTCDGS12(xx)
nFORCE Traffic Controller 9.14
4.
ELECTRICAL INSTALLATION (CONTINUED)
*fpm=Flashes per Minute
**fps=Flashes per Second
FLASH PATTERNS
Warning Flash Pattern Configuration:
a. Set Switch #2 on Breakout box to down position (Switch #1 must be in Up position)
b. Apply voltage to the activation wire of the function which requires pattern to be changed (i.e. Front, Takedown, etc.)
c. Apply voltage to the Mode activation wire to configure mode 2 flash patterns, leave Mode activation wire floating to configure mode 1
flash patterns
d. Momentarily apply voltage to the pattern select wire to change the warning flash pattern
e. Set Switch #2 on Breakout box to up position to save settings and return light-bar to normal operating mode
NOTE: Takedown and Alley light patterns
are limited to pattern #1 – 22
#
Name
SAE
Compliant
Timing
Color
Sequence
fpm
fps
1
Random Single #1
Yes
#1
Variable
-
-
2
Random Single #2
No
#1
Variable
-
-
3
Quint
Yes
#1
Alternating
70
1.2
4
Quad 2
Yes
#1
Variable
-
-
5
Q-Switch
Yes
#1
Variable
-
-
6
Double
Yes
#1
Alternating
115
1.9
7
Power Pulse
Yes
#1
Alternating
180
3.0
8
RoadRunner
Yes
#1
Alternating
115
1.9
9
SlowRunner
Yes
#1
Alternating
70
1.2
10
Warp
No
#1
Alternating
350
5.8
11
Inter-cycle
No
#1
Alternating
-
-
12
Warp 1, 2, 3
No
#1
Alternating
-
-
13
E-Single
Yes
#1
Alternating
125
2.1
14
E-Double
Yes
#1
Alternating
125
2.1
15
E-Triple
Yes
#1
Alternating
125
2.1
16
E-Single Simultaneous
Yes
#1
Simultaneous
125
2.1
17
E-Double Simultaneous
Yes
#1
Simultaneous
125
2.1
18
Super Slow Runner
No
#1
Alternating
55
0.9
19
Quint Simultaneous
Yes
#1
Simultaneous
70
1.2
20
Road Runner Simultaneous
Yes
#1
Simultaneous
114
1.9
21
Quint Pass/Steady Driver
Yes
#1
-
70
1.2
22
Road Runner Pass/
Steady Driver
Yes
#1
-
114
1.9
23
Quint 2
Yes
#1
-
70
1.2
24
Warp 2
No
#1
-
350
5.8
25
Inter-Cycle 2
No
#1
-
-
-
26
Random Dual #1
Yes
#1/2
Variable
-
-
27
Random Dual #2
No
#1/2
Variable
-
-
28
Quint Dual
Yes
#1/2
Alternating
70
1.2
29
Quad 2 Dual
Yes
#1/2
Variable
-
-
30
Q-Switch Dual
Yes
#1/2
Variable
-
-
31
Double Dual
Yes
#1/2
Alternating
115
1.9
32
Power Pulse Dual
Yes
#1/2
Alternating
180
3.0