E-flite Super Cub 25e ARF - Manual (Page 3)

3 E-flite Super Cub 25e ARF Assembly Manual
Important Information
Regarding Warranty Information
Please read our Warranty and Liability Limitations
section before building this product. If you as the
Purchaser or user are not prepared to accept the
liability associated with the use of this Product, you are
advised to return this Product immediately in new and
unused condition to the place of purchase.
Specifications
Wingspan: 68.0 in (1730mm)
Length: 45.5 in (1160mm)
Wing Area: 670 sq in (43.3 sq dm)
Weight with battery: 5.85–6.40 lb
(2.65–2.9 kg)
Weight w/o battery: 5.00–5.60 lb
(2.30–2.55 kg)
Using the Manual
This manual is divided into sections to help make
assembly easier to understand, and to provide breaks
between each major section. In addition, check boxes
have been placed next to each step to keep track
of its completion. Steps with a single circle () are
performed once, while steps with two or more circles
() indicate the step will require repeating, such as
for a right or left wing panel, two servos, etc.
Remember to take your time and follow the directions.
Introduction
For more than half a century, Piper’s Super Cub has
been a favorite of general aviation pilots who spend
most of their time off the beaten path. Its respectable
power, excellent short field performance and rugged
design have made it perfect for back country
transportation, towing gliders or simply getting away
from it all.
The Super Cub 25e ARF expertly captures the look
and feel of this aviation classic with an accurate scale
outline and features unlike anything ever seen in
its power class. This Platinum Series airplane offers
numerous scale details such as a traditional Super
Cub scheme, molded corrugation on the ailerons
and functional flaps, painted aluminum wing struts,
functional shock-absorbing landing gear with scale
Cub wheels and tires, functional split cockpit door, and
more.
But, even with all these scale features, E-flite didn’t
overlook ease of assembly. The two-piece wing and
magnetically secured, factory painted fiberglass
cowling are just a couple of the convenient design
features that make the Super Cub 25e a breeze to
assemble. Even if you add the optional cockpit and
light kits, you can have your airplane ready to fly in a
few evenings. And it will be virtually indistinguishable
from its full scale counterpart and sure to be the envy
of everyone at your flying field!
Table of Contents
Introduction .............................................................. 3
Important Information Regarding
Warranty Information ....................................... 3
Specifications ........................................................... 3
Using the Manual ..................................................... 3
Contents of Kit/Parts Layout ...................................... 4
Covering Colors ........................................................ 4
Hardware/Accessory Sizes ....................................... 4
Recommended Radio Equipment ................................ 4
Power 25 Motor Setup .............................................. 4
Power 32 Motor Setup .............................................. 4
Optional Accessories ................................................ 4
Required Tools and Adhesives ................................... 5
Before Starting Assembly .......................................... 5
Hinging the Ailerons and Flaps ................................. 5
Aileron and Flap Servo Installation ............................ 8
Motor and Speed Control Installation .......................13
Cowling, Propeller and Flight Battery Installation ......14
Landing Gear Installation ........................................15
Stabilizer and Tail Bracing Installation ......................18
Elevator Installation .................................................20
Rudder Installation ..................................................22
Tail Wheel Installation .............................................26
Rudder and Elevator Servo and Linkage Installation ..27
Receiver Installation without Cockpit Kit ....................30
Receiver Installation with Cockpit Kit ........................30
Servo Hatch Cover Installation .................................31
Window and Seat Installation ..................................31
Cockpit Kit Installation (Optional) .............................33
Wing and Wing Strut Installation.............................34
Lighting Kit Installation (Optional) ............................36
Accessory Installation ..............................................38
Center of Gravity ....................................................39
Control Throws .......................................................40
Preflight ..................................................................40
Range Test Your Radio .............................................41
Flying Your Model ...................................................41
Daily Flight Checks .................................................42
Limited Warranty ....................................................42
Warranty Services ..................................................43
Compliance Information for the European Union ......44
Academy of Model Aeronautics
National Model Aircraft Safety Code ..............44