Banner A-GAGE MINI-ARRAY Series - Manual (Page 37)

P/N 43298 rev. E
37
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
MINI-ARRAY ®
Instruction Manual
System Operation
6.3 Diagnostics Program
Emitter or receiver problems may be further diagnosed using the diagnostics routine,
which is included with the MINI-ARRAY software. Launch the program by selecting
Diagnostics... under the MINI-ARRAY menu (see Figure 6-3), or press the F2 key.
The Diagnostics screen (Figure 6-4) displays the type of each emitter and receiver
module (Board) and its functional status (State). If an error has occurred, the specific
problem beam (Channel) will be identified. Additionally, If there is a problem with an
emitter or receiver cable connection, a “No Response” message will be displayed.
The Diagnostics routine also displays the part number and date code of the controller,
which may be useful information if factory-assisted troubleshooting by telephone is
required.
Figure 6-3. MINI-ARRAY software: Main Menu
Figure 6-4. MINI-ARRAY software: Diagnostics screen