Banner S30 Series - Manual

Printed in USA 10/04 P/N 116157
Installation
Guide
S30 Sensors – dc-Voltage Series
Self-contained, dc-operated sensors
* Standard 2 m (6.5') cable models are listed.
• 9 m (30') cable: add suffix “W/30” (e.g., S306E W/30).
• 4-pin Euro-style QD models: add suffix “Q” (e.g., S306EQ). A model with a QD connector requires a
mating cable.
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection.
Doing so could lead to serious injury or death. These sensors do
NOT include the self-checking redundant circuitry necessary to allow their use in
personnel safety applications. A sensor failure or malfunction can cause either
an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and
IEC standards for personnel protection.
Sensing Mode Range LED Output Model*
Opposed 60 m (200')
Infrared
950 nm
– S306E
NPN S30SN6R
PNP S30SP6R
Polarized
Retro-
reflective
6 m (20')
Visible
Red
680 nm
NPN S30SN6LP
PNP S30SP6LP
Fixed
Field
200 mm (8")
cutoff
Infrared
880 nm
NPN S30SN6FF200
PNP S30SP6FF200
400 mm (16")
cutoff
NPN S30SN6FF400
PNP S30SP6FF400
600 mm (24")
cutoff
NPN S30SN6FF600
PNP S30SP6FF600
Additional information on this product is immediately available online at www.bannerengineering.com/116157
View or download additional information, including excess gain curves, beam patterns and accessories.
For further assistance, contact a Banner Engineering Applications Engineer at (763) 544-3164 or (888) 373-6767.
Dimensions
LISTED
R
77.5 mm
(3.05")
53.0 mm
(2.09")
Cabled Models QD Models
68.7 mm
(2.71")
53.0 mm
(2.09")
Yellow LED
Output Indicator
Green LED
Power Indicator
2 m (6.5') Cable Jam Nuts
(2 Provided)
M30 x 1.5
Thread
P
bn
bu
wh
bk
+
10 - 30V dc
–
Load
Load
Cabled Emitters
bn
bu
wh
bk
10 - 30V dc
Load
Alarm
+
–
bn
bu 10-30V dc
+
–
NPN (Sinking) Outputs
Standard Hookup
10 - 30V dc
bu
bk
bn
wh
+
–
PNP (Sourcing) Outputs
Standard Hookup
QD Emitters
Alarm Hookup
Alarm Hookup
bu
bn
wh
bk
+
10 - 30V dc
–
Load
Load
bn
bu
wh
bk
10 - 30V dc
Load
Alarm
+
–
NOTE: QD hookups are functionally identical.