Metrohm 746 VA Trace Analyzer - Manual (Page 81)

7 How to ...?
VA Database 2.0
74
3. Click on or MAIN WINDOW / Window / Communication . The
VA COMMUNICATION
window will be opened or (if it is already
open) put on top.
4. Click on . Select the determination files (
*.dtm
) to
be sent in SEND VA FILES window and click on .
5. Confirm the message Make sure that VA Trace Analyzer is ready
to receive files with . All selected *.dtm files will be trans-
ferred to the 746 VA Trace Analyzer.
6. After termination of the data transfer close the SYSTEM win-
dow in the 746 VA Trace Analyzer by pressing the
key. The transferred determinations can be loaded to the
working storage then.
Send method files from the backup directory to the
746 VA Trace Analyzer
1. Open the dialog pages "METHODS" or "DATA CARD" in the
746 VA Trace Analyzer.
2. Press the softkeys and /
Ifc.2> .The SYSTEM window will appear indicating that data can
be received via the RS232 interface.
3. Click on or MAIN WINDOW / Window / Communication . The
VA COMMUNICATION window will be opened or (if it is already
open) put on top.
4. Click on . Select the method files ( *.mth ) to be sent
in SEND VA FILES window and click on .
5. Confirm the message Make sure that VA Trace Analyzer is ready
to receive files with . All selected *.mth files will be trans-
ferred to the 746 VA Trace Analyzer.
6. After termination of the data transfer close the SYSTEM win-
dow in the 746 VA Trace Analyzer by pressing the
key. The transferred methods can be loaded to the working
storage then.
Send sample table files from the backup directory to
the 746 VA Trace Analyzer
1. Open the dialog pages "SAMPLES" in the 746 VA Trace Ana-
lyzer.