Metrohm 746 VA Trace Analyzer - Manual (Page 62)

5 VA Communication
VA Database 2.0
55
If data is sent from the VA Database program (via or
directly from the
VA DATABASE TABLE
or
VA DATABASE EX-
PLORER window) to the 746 VA Trace Analyzer, the progress of
the data transfer is shown in the lower bar of the COM port sub-
window in the VA COMMUNICATION window. The name of the file
being sent is indicated above this bar.
Data transfer protocol
Open the log file where all activities on the re-
lated COM port are recorded with the Windows
Editor. For details concerning the log file settings
see Default directories, page 51.
COM port reset
Abort all data transfer actions between PC and
746 VA Trace Analyzer and reset the selected
COM port. Files in queue to be sent to the 746
VA Trace Analyzer must be sent again after-
wards.
If the sending of data is aborted, the data receipt
at the 746 VA Trace Analyzer is also canceled
automatically.
If the receiving of data is aborted, the
sending of data from the 746 VA Trace
Analyzer is not canceled automatically
and an error can occur at the COM port.
In this case, press again.
Note: Use this button only if problems in the data transfer occur.