Metrohm 746 VA Trace Analyzer - Manual (Page 79)

7 How to ...?
VA Database 2.0
72
Send sample tables to the backup directory
1. If you want to observe the process of data transfer, click on
or
MAIN WINDOW / Window / Communication
to open the
VA
COMMUNICATION window (the data transfer works also in the
background).
2. On the dialog page "SAMPLES" in the 746 VA Trace Analyzer
press the softkeys
< >> >
and .
The current sample table will be transferred as ASCII sample ta-
ble file ( *.smp ) to the predefined backup directory (see Default
directories, page 51).
Note: The transfer of sample table files can only be done via RS
Interface 1 at the 746 VA Trace Analyzer.
Send rack definition files to the backup directory
If a 695 Autosampler is connected to the 746 VA Trace Analyzer,
the rack data configuration files stored in the 695 Autosampler
can be saved first on a data card and then on the PC. Proceed
as follows:
1. If you want to observe the process of data transfer, click on
or MAIN WINDOW / Window / Communication to open the VA
COMMUNICATION window (the data transfer works also in the
background).
2. Press the softkeys , <695 Autosampler> , and
def> on the dialog page "STAND" in the 746 VA Trace Ana-
lyzer.
3. Load the desired rack data by entering the Rack name and
pressing the softkey .
4. Store the rack definition file to the data card inserted in the
746 VA Trace Analyzer by pressing the softkey
Cd.> .
5. Select the desired rack definition file ( *.aut ) on the dialog
page "DATA CARD" and press the softkeys and
/ .
The current rack definition data will be transferred as binary rack
definition file (
*.aut ) to the predefined backup directory (see De-
fault directories, page 51).