Metrohm 746 VA Trace Analyzer - Manual (Page 23)

2 Main window
VA Database 2.0
16
Display of calibration curves
MAIN WINDOW / Edit / Options...
The display of calibration curves (single or over-
lay curves) can be changed in the appearing
OPTIONS window with the tab Curves :
Note: With determinations recorded by the 693 VA Processor
(program version 5.693.0022 or older) no calibration curves can
be displayed.
List of curves
The list shows all overlay calibration curves. Sin-
gle curves can be deleted with . New
curves can be added by drag and drop of curve
symbols from the
VA DATABASE EXPLORER
.
Pattern
Switch display of measured values, deviation
markers and calibration curve on/off, change line
colors.
Remove selected calibration curve from overlay
curves.