Metrohm 746 VA Trace Analyzer - Manual (Page 56)

5 VA Communication
VA Database 2.0
49
5 VA Communication
5.1 VA Communication overview
In the VA COMMUNICATION window the connections to the 746 VA
Trace Analyzers and 693 VA Processors are installed. The COM
port setup and the default destination for storing the incoming
data is defined. It is possible to connect up to four VA instru-
ments to a PC. To every connected instrument a specific destina-
tion database can be defined where the incoming data is stored.
When the
VA COMMUNICATION window is opened the course of
the data transfer on the different ports is shown.
Data which is not stored in the database itself (methods, deter-
minations, sample tables, rack data) can be sent back to the 746
VA Trace Analyzer from this window.
5.2 Opening/closing of VA Communication
Opening the VA Communication window
MAIN WINDOW / Window / Communication (F12)
The VA COMMUNICATION window will be opened
or (if it is already open) put on top.
Closing the VA Communication window
Closing the Window
The VA COMMUNICATION window will be closed
by pressing the button of the VA COMMUNICA-
TION window.
Note: The settings of the VA COMMUNICATION window can be
stored at any time with MAIN WINDOW / Settings / Save Now .