Metrohm NIRS XDS RapidLiquid Analyzer - Manual (Page 44)

42 ▪▪▪▪▪▪▪
Vision takes an instrument reference, which takes
about 20 seconds. This dialog box is displayed.
Next a sample scan is taken, and this box is displayed.
This takes about 30 seconds.
Wavelength Linearization is performed in two
sections, each of which takes about 45 seconds.
The user must confirm the linearization to proceed. A
dialog box will appear, and the user should click “Yes”
to proceed to the next step. Continue until this step is
completed.
The user must confirm the linearization to proceed. A
dialog box will appear, and the user should click “Yes”
to proceed to the next step.
A dialog box confirms that this has taken place. Click
“OK”.
Vision will perform these operations again, for the
opposite direction of grating movement. Repeat the
confirmations. Continue until the Wavelength
Linearization steps are completed.