Metrohm NIRS XDS RapidLiquid Analyzer - Manual (Page 22)

20 ▪▪▪▪▪▪▪
4
Assembly of the Instrument
The XDS Rapid Liquid Analyzer will be assembled and installed by a trained representative of
Metrohm. This person will perform a full suite of diagnostics to verify correct operation, and will
explain basic operating points. Assembly information is given as a guide for the user, should re-
assembly ever be required due to an instrument move or for other reasons.
Verify that the following items have been received in good condition:
• Metrohm XDS Monochromator
• Rapid Liquid Module
• Vision Spectral Analysis Software
• Spare Lamp (in Accessory Kit)
• Accessory Kit, containing cords, cables and other required items
• Safety Manual for CE certification
• Instrument Test Results Packet
• XC-1300 Wavelength Calibration Standard
(Packaging may vary from that shown.)
If any items are missing, please contact Metrohm service or your next local distributor.
The serial number of the instrument and module are located on serial plates on the left side, when
facing the instrument. These serial numbers should match the serial numbers marked on the shipping
papers.
When using Vision software, the software will automatically read the monochromator serial number
and the module serial number.
Follow the assembly sequence that begins on the next page: