Metrohm NIRS XDS Process Analyzer – SingleFiber - Manual (Page 64)

62 ▪▪▪▪▪▪▪
14. Fiber Length depends on the fibers used in the system. The default is 0-3 Meters. Most Single
Fiber Systems use fiber lengths “Greater than 6 meters.”
15. Now click on Channel 2. By default, Channels 2-9 are marked “Not Used”. If a channel is
used, be sure to click “Used” for that channel. Continue through all channels and verify the
correct setting.
Click on OK when finished. This returns the user to the DCM screen.
16. Verify that the name is entered for the DCM. Click OK when finished.
17. Click on the DCM method to highlight it,
then click on OK.
The instrument will connect.