Metrohm NIRS XDS Process Analyzer – SingleFiber - Manual (Page 59)

▪▪▪▪▪▪▪ 57
Use Window Correction
Select this when using XDS Process instrument with Transmission Pair.
When calibration or library transfer (between instruments) is anticipated, be sure that Reference
Standardization and Instrument Calibration are selected, BEFORE creation of a DCM. These features
assure best method transfer between similar instruments.
When finished, click on the “OK” button.
10.3 Connect to Instrument
This section covers instrument communication. Be sure the instrument is turned on, and the RJ-45
connection is configured correctly.
1. Select Configure Input from the menu
bar.
2. This screen sets up communication
parameters for the instrument. The XDS
instrument has a unique driver. Highlight
this box and click on “Configure”.