Metrohm NIRS XDS Process Analyzer – SingleFiber - Manual (Page 63)

▪▪▪▪▪▪▪ 61
11. Click on the drop-down arrow beside the Tip Type box. This shows supported types of probe
configurations. For transmission cells (as shown) choose “Transmission Pair”.
12. For probe types shown above, choose “Single Pass Probe”.
13. Click on the drop-down arrow next to Fiber Count. Supported types are Regular Bundle,
Micro Bundle, and Single Fiber. In this case select “Single Fiber”.
Scans defaults to 32 scans for a spectrum. This is normally not changed, unless there is a
sampling reason that requires fewer or more scans.