Metrohm NIRS XDS Process Analyzer – SingleFiber - Manual (Page 57)

▪▪▪▪▪▪▪ 55
3. To begin, a new project must be
created. The project is used to store
data and calibrations for a given type of
analysis.
Multiple projects may be used, to keep
spectra, calibrations and other data
separate and well-organized.
Assign the project some meaningful
name, to make it easy to remember. For
our purposes, we simply called this
“project7”. Please use a more
descriptive name.
Vision will assign a Location; leave this
blank.
4. Vision asks if the default directory
location is acceptable.
Click on “Yes”. Vision creates a directory
for the project as shown.
5. Vision prompts the user to connect to
the instrument. Be sure the instrument is
turned on and is ready.
Click on “View Spectra”.
This establishes the “Project” in Vision. The project is where data will be acquired. Next proceed to
Configure Options.
10.2 Configure Project Options
Before tests are run, the Options must be set. This determines the methods of instrument set-up, and
affects how the data will be acquired.