Brandmotion 2000-3802 - Manual (Page 8)

Section 2: Chevy Tahoe/Suburban/Avalanche and GMC Yukon
Instructions, 2007 – Current
2000-3802 Instructions 10-11-12.doc Page 8 of 15
Figure 5
9. Connect the female end of the 16-pin and 14-pin
connector from the DPS harness to the back of the
radio head unit. (Figure 6)
Figure 6
10. Connect the two white connectors to the DPS
module. (Figure 7)
Figure 7
11. Connect the DPS turn-on switch to the remaining
connector on the DPS harness. (Figure 8)
Figure 8
12. Reconnect battery of vehicle.
13. Place DPS Module with the Bongiovi DPS Acoustics
side is face down. Then confirm the DPS Unit’s dip
switches are all set to the down position –
“DDDDD”. (Figure 9)
Figure 9
14. Turn vehicle ignition key to “ON” position. Turn on
radio head unit for 10 seconds. (Note: There should
be no sound from the speakers). Disconnect white
4-pin connector from back of DPS module. (Figure
10)
Figure 10