Brandmotion 2000-3802 User Manual
Page 2
INSTALLATION INSTRUCTIONS
2000-3802 Instructions 10-11-12.doc
Page 2 of 15
TABLE OF CONTENTS
Pages
Kit Components
3
Reference Pin Out for DPS Wiring Harness to DPS Turn On Switch
3
Section 1: Chevy Silverado/GMC Sierra
4 - 6
Section 2: Chevy Tahoe/Suburban/Avalanche and GMC Yukon
7 - 9
Section 3: Chevy Traverse/GMC Acadia/Buick Enclave
10 - 12
Section 4: Chevy Impala
13 - 15
General Preparation:
1. Park vehicle on level ground and secure with tire chucks.
2. Ensure all radio functions are working properly before disassembly.
3. Record any pre-set radio stations if desired since these may be lost as power is disconnected.
4. Remove any CDs to avoid possible jam.
5. Return all Treble, Bass, Fade, and Balance to neutral setting. The DPS is designed to provide the
best audio experience at the neutral settings. You can, however, adjust them to meet your
desired experience.
6. For vehicles equipped with automatic transmissions, place shifter in the N (neutral) position and
set parking brake.
7. Loosen the negative battery cable bolt. Remove negative battery cable from terminal and position
away from battery.