Brandmotion 2000-3802 - Manual (Page 4)

Section 1: Chevy Silverado/GMC Sierra Instructions, 2007 – Current
2000-3802 Instructions 10-11-12.doc Page 4 of 15
1. Ensure all radio functions are working properly, return
all Treble, Bass, Fade, and Balance to neutral settings,
and remove any CDs to avoid possible jam before
disassembly.
2. For vehicles equipped with automatic transmissions,
place shifter in the N (neutral) position and set parking
brake.
3. Loosen the negative battery cable bolt. Remove
negative battery cable from terminal and position away
from battery.
4. Using a plastic trim tool, gently loosen panel under
steering column. (Figure 1)
Figure 1
5. Using the plastic trim tool, gently remove IP center
trim panel. (Figure 2)
Figure 2
6. Using a 7mm socket driver, remove 6 bolts attaching
the radio head unit and HVAC unit. (Figure 3)
Figure 3
7. Pull out the radio head unit and disconnect the 16-pin
and 14-pin connectors from the back of the radio. (Figure
4)
Figure 4
8. With the radio head unit pulled out of the way, drop
the white connectors DPS harness though the opening
behind radio cavity on the right side (Figure 5). Move the
console side panel out of the way, and pull the harness
through from underneath the dash on passenger side.
Figure 5