Brandmotion 2000-3802 - Manual (Page 15)

Section 4: Chevy Impala Instructions, 2006 – Current
2000-3802 Instructions 10-11-12.doc Page 15 of 15
16. Plug white 4-pin connector into DPS module and
wait 10 seconds. (Note: There should be no sound
from the speakers). Disconnect white 4-pin
connector from back of DPS module.
17. Plug white 4-pin connector back into DPS module.
After a few seconds you should hear sound from the
radio. Ensure radio head unit is working properly
including all speaker channels.
If you do not hear any sounds, recheck connections
and repeat Steps 13 through 17.
18. Disconnect negative battery cable.
19. Remove passenger hush panel using a 7mm socket
driver to remove the bolts.
20. Using supplied 24” wire ties, secure DPS module
under front of console or behind carpet on
passenger side upper foot well.
21. Reassemble vehicle.
22. Reconnect negative battery cable.
23. Place Bongiovi DPS Badge on the left side of radio
head unit.