Bowers Group Trimos Vectra Height Gauges - Manual (Page 32)

750 50 0002 03
32
Data format
All values are transmitted in ASCII code :
- Transfer of the buffer (c) or the activated line (d):
I: Numbering of the measurement
_: Space
II: Measuring
mode
–: Sign –; no space between the sign and the value
The + sign is replaced by a space
III: Numerical values, aligned at the right side, according to resolution
The missing digits at the left are replaced by spaces
IV: Measuring unit (mm or in)
- Transfer of numerical values only (e)
– 9 9 9 9 . 9 9 9 9 CR
- No space between the sign and the value
- The + sign is replaced by a space
The transfer of data is automatically done after each measurement or by
pressing the Print key, according to the selected configuration mode.
13 Application and adjustments
13.1 Application of the manual and the motorized handwheel
Manual handwheel
The manual handwheel embodies 3 functions:
i. Displacement of the measuring carriage (a).
i. Locking device (b) for the fine adjustment movement and to
keep a connected probe in position.
i. Fine adjustment screw (c) for a precise displacement of the
measuring carriage.
Motorized handwheel
The displacement of the measuring carriage is done by a
rotating movement of the handwheel (max.
±60°). The
measuring carriage speed is proportional to the rotation. 4
zones are available:
: Neutral position
: Measuring zone (slow movement with a slight stop)
and : Normal displacement speed
and : Progressive fast displacement speed
9 9 9 _ F F F F – 9 9 9 9 . 9 9 9 9 _ U U CR
I II III IV
a b c