Config screen, System name, Snmp parameters – AJA FS2 Manual User Manual
Page 93: System name snmp parameters
FS2 v2.1r1
www.aja.com
93
Config Screen
The Config screen includes functions to name the FS2, configure SNMP, hide or show
unused menus, and change the front panel display brightness and FS2 fan speed, and
configure UPnP.
System Name
The System Name parameter sets the name of the FS2 system. To change the System
Name, click on and drag the cursor across the displayed name, and type in a new name.
SNMP Parameters
The following parameters are used to setup the FS2 SNMP (Small Network Management
Protocol) feature.
• SNMP Enable
• SNMP Trap Dest 1
• SNMP Trap Port 1
• SNMP Trap Dest 2
• SNMP Trap Port 2
In addition, the following alarms may affect SNMP messages:
• Power Supply Alarm
• Video1 Format Alarm
• Video 2 Format Alarm
• Reference Alarm
for a description of SNMP and how the FS2
supports it.
Variable
Highlight the existing name and type in a new name, up to 20
characters. Allowed characters are A-Z, a-z, numerals, hyphen,
and period.