AJA FS2 Manual - Manual (Page 24)

FS2 v2.1r1 www.aja.com 24
Chapter 3: Installation & Configuration
Installation Overview
The installation and set up of an FS2 is very simple. Plug both AC supply cords into AC
mains power (separate branch circuits for redundancy), connect the LAN connector to a
LAN, WAN or local computer with a web-browser, and then connect source and
destination video and audio equipment.
Warning!
High Voltage. This situation or condition can cause injury due to electric shock.
Warning!
Do not open the chassis. There are no user-serviceable parts inside. Opening the
chassis will void the warranty unless performed by an AJA service center or licensed
facility
Warning!
Disconnect the external AC power supply line cord(s) from the mains power before
moving the unit.
Warning!
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.