AJA FS2 Manual - Manual (Page 105)

FS2 v2.1r1 www.aja.com 105
HD-SDI, 1.4835Gb
(SMPTE 292)
• 720p/59.94
• 1080i/59.94
• 1080PsF/23.98, 1080PsF/29.97
• 1080p/23.98, 1080p/29.97
• 2Kx1080p/23.98, 2Kx1080p/29.97
HD-SDI, 1.485 Gb
(SMPTE 292)
• 720p/50, 720p/60
• 1080i/60
• 1080PsF/24, 1080PsF/25, 1080PsF/30
• 1080p/24, 1080p/25, 1080p/30
• 2Kx1080p/24, 2Kx1080p/25, 2Kx1080p/30
Dual-link HD-SDI, 2x
1.4835Gb (SMPTE 372)
• 1080p/59.94
• 2Kx1080p/59.94
Dual-link HD-SDI, 2x
1.485Gb (SMPTE 372)
• 1080p/50, 1080p/60
• 2Kx1080p/50, 2Kx1080p/60
3G HD-SDI, 2.967Gb
(SMPTE 425)
• 1080p/59.94 (Level A or B)
• 2Kx1080p/59.94 (Level A or B)
• Dual Stream (2 streams 1.4835Gb HD-SDI)
3G HD-SDI, 2.97Gb
(SMPTE 425)
• 1080p/50, 1080p/60 (Level A or B)
• 2Kx1080p/50, 2Kx1080p/60 (Level A or B)
• Dual Stream (2 streams 1.485Gb HD-SDI)
HDMI
The HDMI input automatically accepts RGB 4:2:2 or YCbCr 4:2:2. HDMI outputs are
configurable between RGB and YUV. HDCP copy protected video is not supported.
• 525i/59.94
• 625i/50
• 720p/50, 720p/59.94, 720p/60
• 1080i/59.94, 1080i/50
• 1080p/23.98, 1080p/29.97, 1080p/59.94, 1080p/24, 1080p/25, 1080p/30, 1080p/50,
1080p/60
Component Analog
The Component Analog Input accepts YUV, configurable to SMPTE or Betacam levels. The
Component Analog Output is configurable to YUV (Betacam or SMPTE), or RGB.
• 525i/59.94
• 625i/50
• 720p/50, 720p/59.94, 720p/60
• 1080i/59.94
• 1080PsF/23.98, 1080PsF/29.97
• 1080p/23.98, 1080p/29.97
• 1080PsF/24, 1080PsF/25, 1080PsF/30 (SMPTE 274)
• Output only: 1080p/24, 1080p/25, 1080p/30 (SMPTE 274)