Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 139)

9 • Set up historical alarm and event logging
• •
• •
•
131
6. To save the configuration and display it in the macro editor, click Finish.
Step 2: Save the startup macro
1. On the File menu, click Save.
2. Close the macro editor.
View historical alarm data in a FactoryTalk View SE Client
Use the Alarm and Event Log Viewer — embedded in a FactoryTalk View graphic
display — to view, sort, filter, and export historical alarm information stored in Alarm
and Event Logs.
With the Alarm and Event Log Viewer, you can:
„ display alarm and event information that has been logged by the FactoryTalk
Alarm and Event Historian
„ define filters to determine which logged alarms and events will be displayed
„ sort the alarms and events that will be displayed
Run the application
You can open the FactoryTalk View Site Edition Client in various ways.
„ from the Windows Start menu in Chapter 8, “Monitor and interact with alarms at
run time”
„ from within FactoryTalk View Studio, which is covered in this section
„ by double-clicking a FactoryTalk View SE Client configuration file (*.cli)