Rockwell Automation FactoryTalk Alarms and Events Quick Start - Manual (Page 11)

Preface
• •
• •
•
3
Logix5000 controllers
The Logix5000 controllers listed in the following table, support FactoryTalk Alarms
and Events services. When you use built-in alarm instructions in Logix5000
controllers, these controllers require a firmware update to version 16.20 or later. If you
do not want to update the firmware in your controllers, use a Tag Alarm and Event
Server for software-based alarms and events. See “Decide what type of alarm
monitoring you need” on page 16
Catalog number Name
1756-L61 ControlLogix Processor
1756-L62 ControlLogix Processor
1756-L63 ControlLogix Processor
1756-L64 ControlLogix Processor
1756-5555 5555 ControlLogix Processor
1768-L43 CompactLogix L43 Controller
1769-L31 CompactLogix L31 Controller
1769-L32C CompactLogix L32C Controller
1769-L32E CompactLogix L32E Controller
1769-L35CR CompactLogix L35CR Controller
1769-L35E CompactLogix L35E Controller
1794-L34 FlexLogix L34 Controller
1756-L61S ControlLogix Safety Processor
1756-L62S ControlLogix Safety Processor
PowerFlex 700S 2 DriveLogix5370
1789-L60 SoftLogix5800
EMULATE RSLogix Emulate 5000
Compatible firmware
The controller firmware versions listed in the following table, are compatible with
FactoryTalk Alarms and Events services:
Controller Firmware version
ControlLogix
16.20 or higher CompactLogix L3x and L4x
DriveLogix
ControlLogix Redundant Systems 16.60 or higher
SoftLogix 16.03 or higher