Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control - Manual (Page 201)

Rockwell Automation Publication 7000A-UM200C-EN-P - June 2014 201
Appendix
I
History of Changes
This appendix summarizes the revisions to this manual. Reference this appendix
to determine what changes have been made across multiple revisions.
7000A-UM200B-EN-P,
May 2013
7000A-UM200A-EN-P,
March 2013
Change
Added instructions to install Redundant Fan assembly
Updated Chromate Plating section
Updated Door Filter and Enclosure sections
Updated standard altitude information
Inserted History of Changes appendix
Change
Converted document from Word to FrameMaker
Removed all PanelView 550 content
Added and linked additional resources
Updated Rectifier Design configurations
Add Shock Indication Label section
Inserted new operator interface information
Updated Hall Effect Sensor section
Added 2400V Converter Cabinet drawing
Added 6600V Converter Cabinet drawing
Added Voltage Sensing section
Added Surge Arrester replacement procedure
Inserted new PowerCage drawings with SPS boards installed
Consolidated all resistance checks section
Updated SGCT and Snubber Circuit section to reflect SPS boards
Added Clamping Pressure graphic showing bolt location
Updated Temperature Sensing section to reflect SPS boards
Added new image in Replacing SGCT section to account for SPS board
Added graphic showing all heatsink types
Updated Snubber Resistor testing section to reflect SPS board
Added Snubber and Sharing Resistor Replacement procedure
Updated Snubber Capacitor testing section to reflect SPS board
Added Snubber Capacitor Replacement procedure
Added Self-Powered SGCT Power Supply - SPS section
Updated section to use consistent rectifier terminology