Rockwell Automation D64046.5.1 U MNL WIN DDMC - Manual (Page 131)

Chapter 9
DDMC32 System
Configuration and Operation of the
9-7
If you have enabled the logging function, you can monitor the fault log to
see which faults have occurred. To monitor the fault log, from the Monitor
menu, choose Monitor Fault Log.
To clear the fault log of all faults, from the Monitor menu, choose Clear
Fault Log. You must stop the DDMC software first. Once you select this
option, you will be prompted to confirm that you wish to finish the clear
process. Once you confirm, you will see a message indicating that all
faults have been cleared.
Once the system is fully configured, the operator can monitor the system.
Chapter 10, ’Using the Report Generator Software’, tells you how to
monitor the system reports and faults.
Monitoring the Fault Log
Clearing the Fault Log
What to Do Next