Rockwell Automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE - Manual (Page 7)

Table of Contents
1785-6.5.19 November 1998
Quick Start Chapter 1
Installing and Configuring the Interface Module. . . . . . . . 1-2
What You Have Done. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
What’s Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Installing the Interface Module Chapter 2
Using This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Necessary Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Preventing Electrostatic Discharge (ESD) Damage . . . . . . 2-4
Complying with European Union Directives . . . . . . . . . . . 2-4
EMC Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Low Voltage Directive . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Installing the Interface Module . . . . . . . . . . . . . . . . . . . . 2-5
Attach the Connector Header to the Processor. . . . . . . 2-5
Connect the Interface Module to the Processor . . . . . . 2-6
Install the Interface Module into the Chassis . . . . . . . . 2-6
Removing the Interface Module. . . . . . . . . . . . . . . . . . . . 2-8
Configuring the Interface Module
for Ethernet Communication Chapter 3
Using This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Configuring Channel 3A . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Specifying Ethernet-Specific Information. . . . . . . . . . . . . 3-2
Manually Entering Module Configuration Information . 3-2
Using BOOTP to Enter Configuration Information . . . . . 3-4
Edit the BOOTPTAB Configuration File . . . . . . . . . . . . . 3-4