Rockwell Automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE - Manual (Page 23)

1785-6.5.19 November 1998
Installing the Interface Module 2-7
Verify that power to the
1771 I/O chassis is OFF.
1.
Raise the locking bar.
2.
Insert the module combination into the
1771 I/O chassis in the left-most slots
and slide along the the card guides.
3.
Lower the locking bar into place
over the modules.
4.
!
Remember to wear a grounding
wrist strap to guard against ESD.
20615-M