Rockwell Automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE - Manual (Page 18)

1785-6.5.19 November 1998
2-2 Installing the Interface Module
Use the interface module with a programming software package that
supports configuration for channel 3A and the following processors:
All ControlNet 1.5 PLC-5 processors support the 1785-ENET
sidecar module.
Before You Begin Before installing your Ethernet interface module:
1. Check your Ethernet interface module package.
2. Make certain that you have the following:
If any items are missing or incorrect, contact your local
Allen-Bradley sales office or distributor.
Series Revision Processor
E and later any all Enhanced, Ethernet, and ControlNet PLC-5
processors
D B PLC-5/11, -5/20, -5/26, -5/30, -5/40, -5/40L, -5/46,
-5/60, -5/60L, -5/80, -5/86
PLC-5/20E, -5/40E, -5/80E
PLC-5/20C, -5/40C, -5/80C
C K PLC-5/11, -5/20, -5/26, -5/30, -5/40, -5/40L, -5/46,
-5/60, -5/60L, -5/80, -5/86
PLC-5/20E, -5/40E, -5/80E
PLC-5/20C, -5/40C, -5/80C
B L PLC-5/40, -5/40L, -5/46, -5/60, -5/60L
A L PLC-5/30
A K PLC-5/11, -5/20, -5/26
Quantity: Description:
1 PLC-5 Ethernet Interface Module (1785-ENET)
1
Connector kit containing 1 PLC-5 58-pin connector header
1 Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
1 PLC-5 Ethernet Interface Module User Manual,
publication 1785-6.5.19