Rockwell Automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE - Manual (Page 41)

1785-6.5.19 November 1998
Appendix
A
Module Specifications
PLC-5 Ethernet Interface Module (1785-ENET)
Backplane Current 2.2A
Heat Dissipation 37.54 BTU/hr
Environmental Conditions
Operating Temperature 0 to 60 ° C (32–140 ° F)
Storage Temperature –40 to 85 ° C (–40 to 185 ° F)
Relative Humidity 5 to 95% (without condensation)
Shock
Operating 30 g peak acceleration for 11 ± 1 ms duration
Non-operating 50 g peak acceleration for 11 ± 1 ms duration
Vibration
(operating and non-operating) 2 g @ 10 to 500 Hz
0.012 inches peak-to-peak displacement
Hardware Addressing
Module communicates through processor channel 3A. It does not
communicate across the 1771 I/O backplane
Communication Ethernet (TCP/IP protocol, 15-pin AUI transceiver port)
Connections
64 simultaneous connections per module
512 unsolicited definitions per module (used by RSLinx and
INTERCHANGE software packages)
Location
1771-A1B, -A2B, -A3B, -A3B1, -A4B chassis, second left-most slot,
attached to the processor.
Keying none
Weight 0.95 kg (2.1 lbs)
Agency Certification
(when product or packaging is marked)
• CSA Class I, Division 2, Groups A, B, C, D
• UL listed
• CE marked for all applicable directives