Black Box LRU4240 - Manual (Page 205)

Dual Trunk E1 Router
Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 96 56 000 193
ospfd# show ip ospf database self-originate
ospfd# show ip ospf database max-age
ospfd# show ip ospf database router 1.2.3.4 adv-router 2.3.4.5
Related Commands
show ip ospf database opaque-link
Use the show ip ospf database opaque-link command to display information about the link-state type 9 LSAs.
This type denotes a link-local scope. The LSAs are not flooded beyond the local network.
Command Syntax
show ip ospf database opaque-link (A.B.C.D)(self-originate|ADVROUTER)
ADVROUTER = adv-router A.B.C.D
adv-router Displays all the LSAs of the specified router.
A.B.C.D A link state ID (as an IP address).
self-originate Displays self-originated link states.
Command Mode
Priviledged Exec mode
Usage
The following is a sample output from the show ip ospf database opaque-link command, with a link-state
selected.
ospfd# show ip ospf database opaque-link 10.0.220.247
OSPF Router process 100 with ID (10.10.11.50)
Link-Local Opaque-LSA (Link hme0:10.10.10.50)
LS age: 276
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: Link-Local Opaque-LSA
Link State ID: 10.0.220.247 (Link-Local Opaque-Type/ID)
Opaque Type: 10
Opaque ID: 56567
Advertising Router: 10.10.11.50
LS Seq Number: 80000001
Checksum: 0x744e
Length: 26
Link-Local Opaque-LSA (Link hme1:10.10.11.50)
Examples
ospfd# show ip ospf database external 1.2.3.4 self-originate
ospfd# show ip ospf database self-originate
ospfd# show ip ospf database max-age
ospfd# show ip ospf database router 1.2.3.4 adv-router 2.3.4.5
Related Commands
show ip ospf database router
Use the show ip ospf database router command to display information only about the router LSAs.
Command Syntax
show ip ospf database router (A.B.C.D)(self-originate|ADVROUTER)
ADVROUTER = adv-router A.B.C.D
adv-router Displays all the LSAs of the specified router.
A.B.C.D A link state ID (as an IP address).
self-originate Displays self-originated link states.
Command Mode
Priviledged Exec mode
Usage
The following is a sample output from the show ip ospf database router command, with the ip address selected.
ospfd# show ip ospf database router 10.10.11.50
OSPF Router process 100 with ID (10.10.11.50)
Router Link States (Area 0.0.0.0)
LS age: 878
Options: 0x2 (*|-|-|-|-|-|E|-)
Flags: 0x3 : ABR ASBR
LS Type: router-LSA