Black Box LRU4240 - Manual (Page 171)

Dual Trunk E1 Router
Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 96 56 000 159
router rip
Use the router rip global command to enable a RIP routing process.
Use the no form of the command to disable the RIP routing process.
(no) router rip
Command Syntax
There are no arguments or keywords for this command.
Command Mode: Router Configuration
Examples
router rip
Usage Notes
router rip
version 1
network 10.10.10.0/24
network 10.10.11.0/24
neighbor 10.10.10.10
show debugging rip
Use the show debugging rip command to display the RIP debugging status for these debugging options:
zebos debugging, RIP event debugging, RIP packet debugging and RIP zebos debugging.
Command Syntax
show debugging rip
Command Mode: Enable
There are no arguments or keywords for this command.
Examples
show debugging rip
show ip protocols
Use the show ip protocols command to display RIP process parameters and statistics.
Command Syntax
show ip protocols
Command Mode: Enable
There are no arguments or keywords for this command.
Examples
show ip protocols
RIP(enable)#show ip protocols
116: Routing Protocol is "rip"
117: Sending updates every 30 seconds with +/-50%, next due in 14 seconds
118: Timeout after 180 seconds, garbage collect after 120 seconds
119: Outgoing update filter list for all interface is not set
120: Incoming update filter list for all interface is not set
121: Default redistribution metric is 1
122: Redistributing: connected
123: Default version control: send version 2, receive version 2
124: Interface Send Recv Key-chain
125: net2 2 2
126: Routing for Networks:
127: net1
128: net2
129: Routing Information Sources:
130: Gateway BadPackets BadRoutes Distance Last Update
131: 60.10.2.1 0 0 120 00:15:22
132: Distance: (default is 120)