Black Box LRU4240 - Manual (Page 167)

Dual Trunk E1 Router
Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 96 56 000 155
RIP C
OMMAND
R
EFERENCE
configure terminal
Use the configure terminal command to change to configure terminal mode.
Command Syntax: configure terminal
Command Mode: Enable
Usage
There are no arguments or keywords for this command. The prompt will change to
Rip(config)#
Example
Rip(enable)#configure terminal
Rip(config)#
router rip
Use the router rip command to change to configure router mode.
Command Syntax
router rip
Usage
There are no arguments or keywords for this command. The prompt will change to
Rip(router rip)#
Example
Rip(config)#router rip
Rip(rip)#
interface IFNAME
Use the interface IFNAME command to change from configure terminal mode to configure interface mode.
Command Syntax: interface net1 | net2 | mlppp | e0
Command Mode:: Config
Usage
The argument to this command is one of the router interface e0 for ethernet port, net1 for PPP1, net2 for PPP2, or mlppp for
MLPPP
Example
Rip(config)#interface net1
Rip(net1)#
quit
Use the quit command to change exit from the current mode and return to the higher level mode.
Command Syntax: quit
Example
Rip(config)#quit
Rip(enable)#
debug rip
Use the debug rip command to specify the options for the displayed debugging information for RIP events. Use the no parameter
to disable all debugging.
Command Syntax
debug rip (events|zebos|packet)
events - RIP events debug information is displayed.
zebos - RIP and ZebOS communication is displayed
packet - packet (recv|send (detail)) Specifies RIP packets only
debug rip packet
recv - specifies that information for received packets be displayed.