Rockwell Automation 140G-NTK-E12 LSIG and LSIG-MM Release - Manual (Page 37)

DIR 1000587R0002 (L3821)
(37)
4.2.6 Communication Module Menu
Parameter/Function Values Notes
Local/Remote Local/Remote
Serial address 1 ... 247 247 default address
Baudrate 9600 bit/s
19200 bit/s
Physical protocol 8,E,1 - 8,0,1 - 8,N,2 - 8,N,1
Addressing standard Modbus
4.3 Contact S51/MM
4.3.1 General characteristics
The contact gives feedback about "MM" protection enabled.
4.3.2 Characteristics of the signalling contacts
The following data are defined for resistive loads (cos ϕ = 1)
4.3.3 Power supply
The S51/MM signalling contact is self-powered, by auxiliary power from the relay.
Type of contact SPST
Maximum switching voltage 130 Vdc 380 Vac
Maximum switching current 5 A 8 A
Maximum switching power 175 W 2000 VA
Breaking capacity @ 35 Vdc 5 A ——
Breaking capacity @ 120 Vdc 0.2 A ——
Breaking capacity @ 250 Vac —— 8 A
Breaking capacity @ 380 Vac —— 5.2 A
Contact/coil insulation 4000 V eff
Contact/contact insulation 1000 V eff