MacDon 873 Combine Adapter - Manual (Page 68)

Form # 147069 Issue 09/06 66
JOHN DEERE – 60 SERIES COMBINE
H
J
Adapter Mounting Instructions
for John Deere Combines
PREPARING THE COMBINE
1. 60 series Combines:
Loosen and remove bolt at (H). Remove washer and
discard. Ensure spacer (not shown) behind washer
remains in place. Loosely re-install bolt at (H) through
new torque arm bracket.
Remove nut (J) and install bottom of torque arm
bracket over bolt at bottom of feeder house. Tighten
and torque bolt (H) and nut (J) to 160 ft-lbs.
H
J