MacDon 873 Combine Adapter - Manual (Page 65)

Form # 147069 Issue 09/06 63
Adapter Mounting Instructions
for John Deere Combines
PREPARING THE ADAPTER – JOHN DEERE 60 SERIES COMBINES:
1. 60 Series Combines & 9660 Straw Walker
Combines:
To improve feeding, add one tine to each end of
retracting tine drum.
2. 60 Series Combines (except Contour Master with
dust shields removed):
Move bolt (D) and nut (E) to hole (F) for proper
float.
3. 60 Series Combines:
Mount pump to gearbox using four Allan head
screws (H) supplied. Secure pump in storage
position on R/H side of adapter frame using
lynch pin (J).
NOTE: Torque Allan screws (H) to 14 ft.lbs (20
N.m).
NOTE: Be sure to place flat washer (K) supplied
in kit between pump and gearbox prior to
installing Allan screws (H).
FLOAT LOCKOUT – REPOSITION HARDWARE
F
E D
K
INSTALL WASHER BETWEEN PUMP & GEARBOX
H
MOUNT PUMP TO GEARBOX
J
MOUNT PUMP IN STORAGE POSITION