MacDon 873 Combine Adapter - Manual (Page 67)

Form # 147069 Issue 09/06 65
Adapter Mounting Instructions
for John Deere Combines
PREPARING THE ADAPTER – JOHN DEERE CONTOUR MASTER COMBINES (ALL) cont’d:
6. Contour Master (all):
Mount pump to gearbox using four Allan head
screws (H) supplied. Secure pump in storage
position on R/H side of adapter frame using
lynch pin (J).
NOTE: Torque Allan screws (H) to 14 ft.lbs (20 N.m).
NOTE: Be sure to place flat washer (K)
supplied in kit between pump and gearbox prior
to installing Allan screws (H).
K
INSTALL WASHER BETWEEN PUMP & GEARBOX
H
MOUNT PUMP TO GEARBOX
J
MOUNT PUMP IN STORAGE POSITION