MacDon 9352c SP - Manual (Page 62)

Form # 147459 Issue 11/06 Web Rev_01 60
MAINTENANCE/SERVICE
Fuels, Fluids and Lubricants (continued)
ENGINE OIL
SAE 15W40 complying with SAE specs for API Class SJ and CH-4 engine oil minimum. High grade oil would
be API CI-4SK or API CI-4.
POWER HUB GEAR LUBRICANT & BEVEL GEAR BOX LUBRICANT
Use ISO VG220 synthetic gear lubricant. The
following oil company brand names are
recommended:
Petro Canada: Traxon E Synthetic 75W-90
Esso/Exxon: SPARTAN Synthetic 220 EP
Shell: OMALA HD 220
Mobil: Mobilube SHC 75W-90
Texaco: Pinnacle 220 EP Synthetic Gear Lubricant
Chevron: Tegra Synthetic Gear Lubricant ISO 220
STORING LUBRICANTS
IMPORTANT: Your machine can operate at top efficiency only if clean lubricants are used. Use clean
containers to handle all lubricants. Store them in an area protected from dust, moisture and other
contaminants.
SYSTEM CAPACITIES
S.I. U.S.
Fuel Tank
284 L 75 gal.
Hydraulic System: Total (varies with options)
65 L (approx.) 17 gal. (approx.)
Reservoir Capacity 57 L 15.2 gal.
Bevel Gear Box
1.6 L 1.7 qt.
Power Hubs
1800 mL 60 oz.
Engine Cooling System: Diesel
18 L 4.8 gal.
Diesel Engine Crankcase: Less Filter
9.5 L 10 qts.
With Filter 10.4 L 11 qts.
Air Conditioning System:
Refrigerant (R134a)
1.36 kg 3 lbs.
Oil (SP-15 PAG) 240 cc* 8.1 fl.oz.*
* - This amount of oil is the full system requirement and is included in a new compressor.